Wilwood Forged Dynapro Big Brake Front Brake Kit (Race)NA NB MIATA 90-05

This kit is configured for dedicated road racing on the 1990-2005 model year Mazda MX-5 Miatas. It requires 15” wheels designed with additional inside clearance to accommodate the larger than stock brake package. The four piston DP/ST calipers used in this kit feature a forged aluminum body with a Type III Mil-Spec hard anodized, medium gray color finish. Hard anodizing provides superior wear resistance in the piston bores, and high resistance to abrasion and corrosion throughout. Thermlock® pistons are used to reduce heat transfer from the pads to increase fade resistance, and to extend service life by decreasing temperatures in the caliper body, fluid, and seals. Internal damper springs and controlled retraction, high-temperature piston seals assure consistent pedal height from start to finish. Caliper piston volumes are sized for compatibility with OE power brake boosters and master cylinders, and are easily configured with manual brake conversions and balance bar pedals using appropriately sized master cylinders. Spec37 alloy, GT competition series 11.00” diameter 72 vane rotors are mounted to either the OE hubs, or Wilwood racing ProHubs, with weight saving forged aluminum hats. Unsprung and rotating weight are minimized while providing high cooling efficiency and rugged durability with thermal stability in sustained high heat competition. Mounting brackets, including all premium grade fasteners, secure the calipers in the stock location, without modifications. This race winning system is completed with high temperature, high friction, endurance compound race pads selected specifically by application. Stainless steel braided flexlines are included in each kit to complete the installation.

Wilwood Forged Dynapro Big Brake Front Brake Kit (Race) Parts Laid Out - Type III Anodize Caliper - GT Slotted Rotor

BRAKE KIT: Forged Dynapro Big Brake Front Brake Kit (Race)

SPINDLE TYPE: Factory Disc Spindle

This Brake Kit is Compatible with the Following Vehicle Makes: Mazda

Note: Kit may fit other vehicles, call Wilwood Sales⁄Tech Support at (805) 388-1188 for more information.

THIS BRAKE KIT HAS A HUB OFFSET OF:

This Hub Offset will move the wheels inward or outward from the fender by this amount on each side of the vehicle

NOTE: Check "Figure 2. Wheel Clearance Diagram" in the installation Instructions below to verify you have adequate wheel clearance for this kit.

• 1. Road Race kits contain high temperature racing pads. Extended low temperature use will cause premature rotor and pad wear.
• 2. This Brake Kit requires 15-inch wheels with additional inside clearance to accommodate the larger than stock brake package. Please refer to the wheel clearance diagram for requirements.
• 3. Calipers in this kit have been selected for use with the OE power brakes. Contact tech support for optional caliper piston sizes and master cylinder recommendations if using a manual conversion.

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov

Applicable to Brake Pads Only

• Assembly Instructions